Color and protect wooden floors without visible transitions, applying a single coat of the Oil Stain will create a transparent look showing the wood's natural grain, whilst an optional second coat can give a more intensive color tone. A clear final coat of Osmo Polyx®-Oil Pure is a must to protect pigmented finishes from wearing the color.

  • Especially fast drying and curing
  • Extremely durable and hard-wearing
  • Water and dirt resistant
  • Attractive color tones, transparent or intensive
  • Specifically for commercial use
  • Suitable for all woods including exotic woods
  • Resistant to common spills such as water, juice, tea, soda and wine
  • Resistant to saliva and perspiration, suitable for children's toys
  • Microporous and breathable; finish will not crack, peel or flake
  • Easily spot repairable
Osmo Oil Stain is ideal as a colored base coat for unfinished wood, OSB, and cork.
Approximate coverage: 250-525 ft2/L with one coat Number of coats: 1 or 2 coats (depending on desired intensity)
Application temperature: +40℉
Drying time: 12hrs
Sizes: 1L

3501 White

3512 Silver Grey

3514 Graphite

3516 Jatoba

3518 Light Grey

3519 Natural

3541 Havanna

3543 Cognac

3564 Tobacco

3590 Black
    Finished surface in 2-3 days, 2-3 coats (1st/2nd Oil Stain, 2nd/3rd clear Polyx®-Oil)

    Transparent color:
  1. Apply very thinly to the clean and dry wood along the wood grain with Osmo Floor Brush, Microfibre Roller or Scraper.
  2. Most brushstrokes can be removed within 30 minutes after applying.
  3. Rub into the wood evenly with a white pad.
  4. Drying time approx. 12 hours (normal climatic conditions, 72℉/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.

  5. Intensive color:
  6. Apply the first coat as described in points 1-4.
  7. Apply the second coat, also very thinly, as described in point 1.
  8. Rub into the wood evenly with a white pad.
  9. Drying time approximately 12 hours, see point 4.
  10. After step 4 or 8, carry out the final top coat with a clear Osmo Polyx®-Oil and allow to dry.
  11. Note: Oil Stain can also be applied to smaller surfaces with a lint-free cloth.

PDF  Product Information


Contact Ivy Hill Supply via email at:

For Sales: 1.888.487.8054
For Technical Support: 1.888.487.8054

1950 6th Avenue South
Seattle, WA 98134 USA

Osmo Holz und Color is accredited according to DIN EN ISO 9001:2000 (quality management system) and DIN 14001 (environmental management system).

In compliance with demands of EURO NORM standard specifications EN 13 and EN 162. Suitable for Children's toys EN71.3, DN 53 1660.