Polyx® Professional Color Oil is a low-VOC, solvent-free colored base coat for wooden floors and furniture. Due to its special oil and wax combination, it can be applied seamlessly and effortlessly, whilst offering extremely high product coverage. Top coating is carried out with a clear Polyx®-Oil in order to provide supreme protection on wood surfaces.

  • Solvent-free for the special requirements in public spaces
  • Attractive color tones
  • Very high coverage rate
  • Resistant to saliva and perspiration, suitable for children's toys
  • Microporous finish based on natural oils
  • Suitable for all wood types
  • Easily spot repairable
Polyx® Professional Color Oil is ideal as a colored primer for all unfinished wood, OSB, and cork. It can also be used on stairs and furniture for which the application of solvent free products is required, e.g. public spaces. To complete the finish, a top coat of a suitable Polyx® Clear Coat is required.
Approximate coverage: 645 ft2/L with one coat
Number of coats: 1 coat
Application temperature: +40℉ to 95℃
Drying time: Approximately 8-10 hrs
Sizes: .005L, .125L, 1L

5411 White

5412 Silver

5413 White Intensive

5414 Graphite

5415 Smoke

5416 Jatoba

5417 Black Intensive

5436 Caramel

5437 Sand

5441 Havanna

5443 Cognac

5464 Tobacco

5468 Antique Oak

5471 Black
    Finished surface in 2 days, 2 Coats; 1 Pro Color oil and 1 Clear Polyx®-Oil.
  1. First coat on the unfinished wood sanded to specification approximately 645 ft2/L. Apply very thinly along the grain to the clear and dry wood with OSMO Scraper.
  2. Massage into the wood evenly with white pad or brush ring (OSMO Floor-X Buffer). Even out structured or chamfered floors exclusively with a brush ring.
  3. Completely remove excess product. Remove excess product with a brush. Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
  4. Allow approximately 35-45 minutes for product to penetrate surface.
  5. Drying time approximately 8-10 hours (normal climatic conditions, 72℉/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  6. After drying, apply a top coat with a clear Polyx®-Oil finish and allow to dry.

  7. Note: on smaller areas, Pro Color Oil can be applied with a lint-free cloth.

PDF  Product Information

PDF  Application Instructions


Contact Ivy Hill Supply via email at:

For Sales: 1.888.487.8054
For Technical Support: 1.888.487.8054

1950 6th Avenue South
Seattle, WA 98134 USA

Osmo Holz und Color is accredited according to DIN EN ISO 9001:2000 (quality management system) and DIN 14001 (environmental management system).

In compliance with demands of EURO NORM standard specifications EN 13 and EN 162. Suitable for Children's toys EN71.3, DN 53 1660.